- Key performance benefit: Portable two-station filtration system designed to remove workplace fumes, smoke, dust, and vapors. Provides high airflow performance with up to 297 m³/h (175 cfm) and twice the suction power of previous models.
- Material & construction: Compact BVX-250 extraction unit with integrated HEPA 13/Gas main filter and pre-filter. Designed for use with compatible BVX and Omniflex arms and hoses.
- Risk reduction/compliance benefit: HEPA 13 filtration provides 99.97% efficiency for capturing airborne contaminants, including fumes, smoke, dust, and vapors.
- Protection level: Two-station filtration system with HEPA 13 filtration efficiency.
- Comfort & usability: Quiet operation (<55 dBA at medium setting), three power levels, and a compact footprint for placement under or on the benchtop.
- Safety & compliance assurance: Safety compliance includes UL & CSA, UKCA, KC, PSE, NOM, CE (ISO-14644), and TUV.
- Key performance benefit: Dual-port soldering and rework system designed to support two users simultaneously or a single user with dual applications. Provides up to 80 W of output power per channel for soldering, desoldering, and rework tasks.
- Material & construction: The system includes the MX-PS5200 power supply, the MX-H1-AV advanced handpiece, the MX-W1AV tip-saver workstand, and the MX-CP1 cartridge removal pad. Uses induction heating with Metcal SmartHeat® technology.
- Risk reduction/compliance benefit: Ground-fault interrupt monitors the AC ground and alerts the operator, and shuts down the system if a ground failure is detected. Tip-to-ground potential and resistance are kept low.
- Protection level: SmartHeat® fixed temperature technology automatically adjusts power levels during each soldering operation to maintain consistent operating temperatures.
- Comfort & usability: Dual simultaneous output allows two handpieces to dynamically share the 80 W output power. User-programmable power-save mode allows an adjustable entry time between 10 and 120 minutes.
- Safety & compliance assurance: Certified to cTUVus and CE standards.
Recommended For
- Removing workplace fumes
- Removing smoke from workstations
- Dust extraction applications
- Vapor removal during processes
- Use with soldering systems
- Bench-top fume extraction setups
- Soldering applications
- Desoldering tasks
- Electronic rework operations
- High-mass component soldering
- Multilayer board soldering
- Lead-free solder processes
Product Details
- Model: BVX-250-KIT
- Product Type: Fume Extraction Kit
- Stations: 2-Station system
- Filtration: HEPA 13/Gas main filter and pre-filter
- Max Airflow (Free Blowing): 297 m³/h (175 cfm)
- Flow Rate: 2 × 75 m³/h (45 cfm)
- Static Pressure: 1743 Pa (7” WC)
- Noise Level: <55 dBA (Medium setting)
- Voltage: 100 – 240 VAC, 1 phase
- Frequency: 50/60 Hz
- Power: 150 Watts
- Dimensions (W × D × H): 268 × 400 × 320 mm (10.5” × 16” × 13”)
- Weight: 12 lbs (5.5 kg)
- Model: MX-5210
- Product Type: Solder/Rework System
- Series: MX-5200 Series
- Output Ports: Dual simultaneous ports
- Output Power: 80 W max per channel (at 22 °C ambient)
- Input Voltage: 100–240 VAC, grounded circuit
- Frequency: 50/60 Hz input, 13.56 MHz output
- Heating Method: Induction, SmartHeat®
- Rated Power Consumption: 125 W max
- Tip-to-Ground Potential: < 2 mV
- Tip-to-Ground Resistance: < 2 Ohm
- Idle Temperature Stability: 1.1 °C (2 °F) in still air
- Ambient Operating Temperature: 10–40 °C (50–104 °F)
- Maximum Enclosure Temperature: 55 °C (131 °F)
- Power Supply Dimensions (W × D × H): 12.1 × 13.0 × 23.5 cm (4.8 × 5.1 × 9.3 in)
- Power Supply Weight: 7.4 lb (3.35 kg)
- Handpiece Cable Length: 122 cm (48 in), burn proof, ESD safe
- Power Cord Length: 183 cm
Primary Industries
- Electronics manufacturing
- Electronics assembly
- Industrial workstations
- Electronics manufacturing
- Electronics assembly
- PCB assembly
Standards and Certifications
- UL & CSA
- UKCA
- KC
- PSE
- NOM
- CE (ISO-14644)
- TUV
- cTUVus
- CE



