Metcal BVX-250-KIT Fume Extraction Kit, 2-Station, HEPA/Gas & Pre-Filter & Nozzles, BVX-250 Series

$990.00
Description
  • Key performance benefit: Portable two-station filtration system designed to remove workplace fumes, smoke, dust, and vapors. Provides high airflow performance with up to 297 m³/h (175 cfm) and twice the suction power of previous models.
  • Material & construction: Compact BVX-250 extraction unit with integrated HEPA 13/Gas main filter and pre-filter. Designed for use with compatible BVX and Omniflex arms and hoses.
  • Risk reduction/compliance benefit: HEPA 13 filtration provides 99.97% efficiency for capturing airborne contaminants, including fumes, smoke, dust, and vapors.
  • Protection level: Two-station filtration system with HEPA 13 filtration efficiency.
  • Comfort & usability: Quiet operation (<55 dBA at medium setting), three power levels, and a compact footprint for placement under or on the benchtop.
  • Safety & compliance assurance: Safety compliance includes UL & CSA, UKCA, KC, PSE, NOM, CE (ISO-14644), and TUV.
  • Key performance benefit: Dual-port soldering and rework system designed to support two users simultaneously or a single user with dual applications. Provides up to 80 W of output power per channel for soldering, desoldering, and rework tasks.
  • Material & construction: The system includes the MX-PS5200 power supply, the MX-H1-AV advanced handpiece, the MX-W1AV tip-saver workstand, and the MX-CP1 cartridge removal pad. Uses induction heating with Metcal SmartHeat® technology.
  • Risk reduction/compliance benefit: Ground-fault interrupt monitors the AC ground and alerts the operator, and shuts down the system if a ground failure is detected. Tip-to-ground potential and resistance are kept low.
  • Protection level: SmartHeat® fixed temperature technology automatically adjusts power levels during each soldering operation to maintain consistent operating temperatures.
  • Comfort & usability: Dual simultaneous output allows two handpieces to dynamically share the 80 W output power. User-programmable power-save mode allows an adjustable entry time between 10 and 120 minutes.
  • Safety & compliance assurance: Certified to cTUVus and CE standards.

Recommended For

  • Removing workplace fumes
  • Removing smoke from workstations
  • Dust extraction applications
  • Vapor removal during processes
  • Use with soldering systems
  • Bench-top fume extraction setups
  • Soldering applications
  • Desoldering tasks
  • Electronic rework operations
  • High-mass component soldering
  • Multilayer board soldering
  • Lead-free solder processes

Product Details

  • Model: BVX-250-KIT
  • Product Type: Fume Extraction Kit
  • Stations: 2-Station system
  • Filtration: HEPA 13/Gas main filter and pre-filter
  • Max Airflow (Free Blowing): 297 m³/h (175 cfm)
  • Flow Rate: 2 × 75 m³/h (45 cfm)
  • Static Pressure: 1743 Pa (7” WC)
  • Noise Level: <55 dBA (Medium setting)
  • Voltage: 100 – 240 VAC, 1 phase
  • Frequency: 50/60 Hz
  • Power: 150 Watts
  • Dimensions (W × D × H): 268 × 400 × 320 mm (10.5” × 16” × 13”)
  • Weight: 12 lbs (5.5 kg)
  • Model: MX-5210
  • Product Type: Solder/Rework System
  • Series: MX-5200 Series
  • Output Ports: Dual simultaneous ports
  • Output Power: 80 W max per channel (at 22 °C ambient)
  • Input Voltage: 100–240 VAC, grounded circuit
  • Frequency: 50/60 Hz input, 13.56 MHz output
  • Heating Method: Induction, SmartHeat®
  • Rated Power Consumption: 125 W max
  • Tip-to-Ground Potential: < 2 mV
  • Tip-to-Ground Resistance: < 2 Ohm
  • Idle Temperature Stability: 1.1 °C (2 °F) in still air
  • Ambient Operating Temperature: 10–40 °C (50–104 °F)
  • Maximum Enclosure Temperature: 55 °C (131 °F)
  • Power Supply Dimensions (W × D × H): 12.1 × 13.0 × 23.5 cm (4.8 × 5.1 × 9.3 in)
  • Power Supply Weight: 7.4 lb (3.35 kg)
  • Handpiece Cable Length: 122 cm (48 in), burn proof, ESD safe
  • Power Cord Length: 183 cm

Primary Industries

  • Electronics manufacturing
  • Electronics assembly
  • Industrial workstations
  • Electronics manufacturing
  • Electronics assembly
  • PCB assembly

Standards and Certifications

  • UL & CSA
  • UKCA
  • KC
  • PSE
  • NOM
  • CE (ISO-14644)
  • TUV
  • cTUVus
  • CE