Jensen Global 14 in Gauge 1.5 in HP Series Dispensing Tips, ID .063 in

• Precision dispensing tips: These Jensen Global HP Series tips are 14 gauge, 1.5 inch dispensing needles for applying adhesives, fluxes, oils, and other fluids with precision and control. The polished, burr-free tip design allows clean dispensing with no residuals, which matters in electronics assembly and other fine work where a stray drop or a ragged bead can mean rework or a rejected part. Threaded onto a Luer-lock syringe or dispenser, they deliver repeatable results shot after shot.
• Construction and materials: Each tip features a polypropylene plastic double-helix (Luer-lock) hub bonded to a stainless steel cannula with a UV-cured adhesive. The polypropylene hub threads on securely and resists many common fluids, while the rigid stainless cannula holds its shape and provides a consistent bore. The 14 gauge cannula has an inside diameter of about 0.063 in (roughly 1.6 mm), giving a well-defined channel for repeatable flow of medium-viscosity materials.
• Geometries and ESD options: The group covers straight, 45 degree, and 90 degree bent versions, so the tip geometry can be matched to the work: straight tips for open, direct dispensing, and angled tips for reaching recessed or awkward locations without repositioning the part. Each geometry is offered in a standard olive version and an ESD-safe black version for static-sensitive assembly, letting users protect delicate electronic components from electrostatic discharge during dispensing.
• Practical for production: All variants are supplied in convenient boxes of 50, which suits assembly and rework environments that go through dispensing tips regularly. Keeping the right gauge, length, and geometry in stock helps maintain consistent dispensing across a production run without interruptions, and the ability to choose between standard and ESD versions means the same trusted tip design can be used across both general and static-sensitive workstations.

Recommended For

• Dispensing adhesives, fluxes, and oils
• Electronics assembly and rework
• Reaching angled or recessed areas (45/90 degree tips)
• Static-sensitive work (ESD versions)

Product Details

• Product type: Luer-lock dispensing tip (needle)
• Gauge / length: 14 gauge / 1.5 in
• Inside diameter: about 0.063 in (~1.6 mm)
• Hub: Polypropylene double-helix (Luer lock)
• Cannula: UV-bonded stainless steel
• Geometries: Straight, 45 degree, 90 degree
• Colors: Olive (standard), black (ESD)
• Packaging: Box of 50

Available Variants

• JG14-1.5HPX — 14 GA 1.5 in HP tip, straight, olive, box/50
• JG14-1.5HPX-ESD — 14 GA 1.5 in HP tip, straight, black ESD, box/50
• JG14-1.5HPX-45 — 14 GA 1.5 in HP tip, 45 degree, olive, box/50
• JG14-1.5HPX-45-ESD — 14 GA 1.5 in HP tip, 45 degree, black ESD, box/50
• JG14-1.5HPX-90 — 14 GA 1.5 in HP tip, 90 degree, olive, box/50
• JG14-1.5HPX-90-ESD — 14 GA 1.5 in HP tip, 90 degree, black ESD, box/50
• The variants differ in tip geometry (straight, 45 degree, or 90 degree bend) and in standard olive versus ESD-safe black construction; all are 14 gauge, 1.5 in, supplied in boxes of 50.

Primary Industries

• Electronics assembly and manufacturing
• Medical device and precision assembly
• Adhesive and flux dispensing
• Laboratory and cleanroom

Standards and Certifications

• ESD-safe versions available (black)